Model: RL-5312K

Rivet Range: M3-M12

Storke:7mm

Weight:2.46kg

Air Pressure: 5-7Bar

Pull Force: 24.8-34.7KN

1, One tool to complete the work of nuts from #8-32，#10-32，#10-24, 1/4-20, 5/16-18, 3/8-16,M3,M4, M5 , M6 , M8 , M10, M12,different sizes of nuts. Nuts including stainless steel, steel, aluminum, copper and other materials can be applied.

2. Fully automatic tool, from installing the nut, to pulling the nut, and pushing out, only one key is needed.

3. Very durable, the nut can be pulled more than 1.8 million times in its entire life. (excluding wear parts)

4. If you are a professional and need to deal with all kinds of heavy-duty work, you need one.

Tips:

1. It's best to do some testing on scrap to adjust the stroke to get the desired nuts result. Start with a short stroke setting and work your way up until the nut is properly tightened. When the nut pull stroke is set too long, you may strip the threads on the mandrel.

2. The direction of pulling the nut should be perpendicular to the plate, so as not to damage the pull rod and get a good pulling nut effect.

Note:

1. During replays nose-piece, for safety, be sure to turn off the air source first .

2. After installing the gun head, please test the air pressure and tools to be normal before starting the formal operation.